Air mattress is an inflatable mattress that's usually made from a vinyl, plastic, or rubber material.
Improved Blood Circulation: Air mattresses allow for better blood circulation and pressure relief to the patient sleeping on it.
Alternate Pressure Points: Medical air mattresses allow the patient's body to move comfortably. Please see the technical details section at the bottom of the page.
A Medineks Medical brand, Medinez Pill Cutter is a simple and inexpensive device to split medicinal pills or tablets, comprising some means of holding the tablet in place, a blade, and usually a compartment in which to store the unused part. The tablet is positioned, and the blade pressed down to split it.
A fuel cell measures alcohol content by creating a chemical reaction that oxidizes the alcohol in the breath sample and produces an electrical current. The more alcohol that is oxidized, the greater the current. The current is measured to determine the subject's BAC. Please see the technical details section at the bottom of the page.
Ultrasonic Nebulizer is a drug delivery device used to administer medication in the form of a mist inhaled into the lungs. Nebulizers are commonly used for the treatment of asthma, cystic fibrosis, COPD and other respiratory diseases or disorders. Please see the technical details section at the bottom of the page.
Device Configuration :
1-Nozzle (steam output apparatus)
8-Output flow adjustment button
9-Function selector button
14-Water tank cover
15-Water tank handling apparatus
16-Drug container assembly place
19-Spiral hose fitting apparatus (medicine will be used during delivery.)
* The ultrasonic nebulizer atomizes the water and breaks it into ultra-tiny pieces that can be easily inhaled.
* It is equipped with protection system that prevents waterless operation.
* Output flow rate can be adjusted according to the desired amount.unt.
* Transducers are made of ceramic and stainless steel and have long life.
* There is an led lamp to see the water level in the water tank at night.
* When desired, the heating function can be selected and operated in the heating mode.
* Works with low audio decibels.
Model name: Medinem
Model no: SDT-15
Standard output flow rate: 380-550ml / Hhour
Water tank capacity: 4.8 lt
Operating voltage: 220-230 V
Operating frequency: 50 / 60Hz
MEDINEKS MEDICAL TRAINING MATERIALS IMP. EXP. CO.
The device's air pump has high capacity air output power, and it has a ten-stage air pressure slider depending on the patient's weight.The front panel has an on/off switch.The model number and brand of the device must be serigraphically printed on the front panel.The upper body of the pump should write instructions for the operation of the device. The lower body part of the device has a hook to place it on the foot side of the patient's bed.
The device must have a serial number on the lower body.There must be two air outlet holes on the side of the device.The entire unit must contain an air pump, air transmission hoses and a bed with PVC boxes. It should also be in a color printed box.
Power: 220V / 50Hz
Pressure range: 1,0-2,0 PSI
Air output: 9.6 litres / minute + / - 15% tolerant
Air circulation time: 5 min.
Electric plug length: 3.5 mt.
Dimensions: 26.5 cm (Height)x14cm (width) x8, 5cm (height))
Weight: 1.67 kg
Pump unit contents: air pump, synchronous motor, circuit board, fuse
The PVC bed where the patient is admitted must be texturized, high density and long-lasting PVC (en-71 PVC K-80,65 HR) and extracted from antimicrobial material. The PVC bed should be in the form of one hundred and thirty boxes in which the air is easily entangled. The head and underside of the patient should have extensions that allow curling into the cot. In this way, any slip and disfigurement of the PVC bed should be prevented. PVC meat thickness should be 0.30 mm.There should be two connecting hoses.(150cm)
In case of any kind of hole in the PVC bed, 3 gr in the set.a repair kit has been found. Dimensions: 3, 25mx0, 9mx5cm; Net weight 2.4 kg, gross weight 2.5 kg.With the dual airway system on the bed, the air boxes inflate and lower the pvc bed after 5 minutes of circulation time with the air pump. In this way, blood pressure in the patient's body is constantly applied to the same points in a constant manner is prevented by preventing wound formation. The device must be guaranteed for two years and one year against PVC bed fabrication defects.
There should be adequate technical service and spare parts guarantee against use-related failures of the device.
FiT239LC gives you a digital indication of your breath alcohol content and thus your possible concentration of intoxication.
1) Install the battery into the battery compartment. All segmentsturn on and then go to Alcohol mode (DAC).
2) To begin, wash your mouth with water before using the unit. Abstain from smoking or drinking for at least 20 minutes.
3) Press ▶ key once to change the unit of the alcohol concentration in Memory mode or REVIEW mode.
4) Press ◀ key for one second can turn on analyzer and press ◀ key for two seconds will turn off analyzer.
5) Press ▲ to activate REVIEW mode to browse the last 25 memories of alcohol result.
6) Insert the provided blowing tube into the gas inlet.
7) Press the OK Keyfor approximately 2 seconds to activate sensor-warm-up process. “PH” flashes for few seconds and then “READY” & ”BLOW” flash alternatively for about 60 seconds. User is required to perform the alcohol test within this period.
8) Blow continuously through the blow tube for approximately 5 seconds. Auto detect your breath sample (or press OK key once) and stop blowing after you hear a ‘beep’ tone. ”DAC” flashes when analyzing the breath sample. Then an increasing reading shows on the display. The final result will be shown together with three blinking “DAC”.
i. A measurement of less than 0.040mg/l will show “LO”
ii. A measurement between 0.040mg/l & 1.739mg/l will show its digital reading.
iii. A measurement above 1.739mg/, “HI” will show on the display.
Hold ▼ keyand OK key while install the battery into the battery compartment to change alcohol unit (‰ BAC, mg/L, % BAC. Press ▲ to activate memory REVIEW mode.
Memory readings: press ▲key to recall the last 40 memories. If memories full, “MEMORY” flashes. Press and hold ▲ key for 1 sec and clear all memories. The “MEMORY” and “Clr” will flash. “----“shown on display means all memories are being erased.
Enhanced feature instructions
10) In DACmode, press ▲ or ▼ key to scroll forward or backward the 40 memory readings
Hold ▲ key for 1 sec to clear the memory readings in DAC mode.
11) The analyzer will turn off automatically after 2minutes.
FiT239LC is designed to alert user as following:
I) Low Level – “LO” will be shown on display if the concentration detected is less than 0.040mg/l BAC.
II) Safety Level – For measurements between 0.040mg/l and Alert Level, the alcohol concentration level shows on the display with backlightturn on.
IV) Alert Level – The analyzer beeps 30 times together with “HI” flashes alternatively. Red backlight flashes alternatively. The LCD will keep the RED backlight.
DON’T DRIVE: You exceed the alert level
V) Exceed Level – For measurements higher than the alert concentration level, the analyzer beeps together with RED backlight flashes for 20 seconds. The digital alcohol concentration reading displays on the screen. If reading greater than 1.739mg/l, “HI” flashes together with RED backlight. Press any key can stop the alert sound.
YOU ARE PROHIBITED TO DRIVE since you already exceed the alert level.
1) After any 5 consecutive tests, allow the device to rest for 2 minutes.
2) When the product is unused, please store in a dry environment.
3) When battery energy not enough to do the alcohol testing, Please replace the batteries immediately.
4) If the difference between two successive reading >0.043mg/l, user should test again.
5) During the breath sampling, user should NOT block the gas outlet. Otherwise, the reading will be affected.
6) Recalibration: According to the international standard (e.g. DIN31051), all measurement instrument should be recalibrated every 6 months.
1. Display Range:
Low, 0.023 ~ 1.904mg/l, Hi
Digital display with Bi-color backlighting
Auto OFF, 2 minutes after any key in
About 5 seconds continuous breath sample
85g (without batteries)
10.Alert level calibrated:
2 pcs blowing tubes
-0℃ to +40℃
The FiT239LC Digital Alcohol Computer should be used as a general guide to the level of alcohol in your body.
Many factors (e.g. environment gas residue, smoke & various smell in human mouth, etc…) may affect the BAC level, so the Readings are For Reference Only.
Neither the reseller nor manufacturer accept any liability arising from the use of this unit
DO NOT drink before you drive!